link mail
Contact
linkedIn
Download


  • suitable for pressure differences measuring

  • big graphical display with backlight

  • 17 pressure units

  • fn. Datalogger, Min/Max, Leak test, Speed, Flow

  • fn. Hold, Damp, Zero

  • fn. 10x increase sensitivity

  • USB communication

  • 2xAA accumulators fn. charging

DMS - digital pressure meter with a datalogger

Basic technical information of pressure transmitter

TypeDMS01DMS1DMS10DMS100DMS1000
Measuring pressure range±200 Pa±2 kPa±20 kPa-100÷200 kPa-100÷2000 kPa
Overpressure max.1 kPa10 kPa40 kPa300 kPa2000 kPa
Burst pressure20 kPa100 kPa100 kPa400 kPa3000 kPa
Errormax. 1%max. 0,5%max. 0,5%max. 0,5%max. 0,5%
Type of pressure measurementDifferentialDifferentialDifferentialDifferential/absoluteRelative
Pressure connectionNipple for a quick coupler 5mm
Ambient temperature range0 ÷ +50°C (non condensing)
Storage temperature-5 ÷ 55°C
ProtectionIP 41
Supply2x AA battery or accumulator
Current consumption50mA with backlight, 10mA without backlight
Max. charging current450mA
Outside dimensions145 x 85 x 35 mm
Weight(with battery)285g

EMC – accords to ČSN EN 61326-1
At the customer´s wish it is possible to secure a metrological verification of the meters at an accredited Calibration Service Centre.

Instructions for use

  • Before the gauge is connected to the pressure circuit, it is necessary to secure that the pressure range of the device corresponds with the measured pressure. With the differential gauge, the user must secure that the measuring membrane is not unilaterally overloaded by pressure that is higher than the permitted non-destructive pressure, corresponding with the nominal range.
  • It is also necessary to check whether the measured media does not attack the used materials, which are silicon, duralumin, brass, polyetherimid plastic and fluorosilicon sealing. Air, nitrogen, water, ethanol, oils, etc. meet this requirement.
LinkedIN
copyright 2010 cressto.cz | Sitemap | Portfolio |